CR-10 Plus

  • CR-10 Plus

Name:CR-10 Plus
Illumination / Viewing geometry:8°:di (8° illumination angle/diffuse viewing, specular component included (SCI); DIN5033 Teil7, JIS Z 8722 condition d, ISO7724/1, CIE No.15、ASTM E 1164)
Light source:Pulsed Xenon lamp
Display modes:Absolute Colour values (Lab or LCh°; for targets only) Colour difference values (∆L,∆a,∆b,∆C,∆H,∆Eab)
Measuring range:L: 10 to 100
Memory:1,000 (Target data and measurement data)
Illuminant/observer condition:D65 / 10°
Repeatability:∆Eab 0.1
Interval3 sec.
Language:English, Japanese, Chinese
Power source:Four AA-size batteries, USB bus power or Optional AC Adapter

Product Description

 Introduction 
   Color Reader CR-10 Plus  is an upgrade for CR-10, it is a simple color reader to measure color difference between two samples. The Color Reader CR-10 Plus is an affordable handheld colorimeter for quick and easy colour control on almost any samples and materials. Just measure the target followed by the sample to compare the colour difference in objective CIELAB colour difference values displayed on the LCD screen. The CR-10 PLUS represents the entry point to objective colour measurement. Compared to many other entry level devices, the CR-10 PLUS is a true colorimeter in full compliance with CIE, ISO and DIN 5033 standards. 

 Features 
  •   Extremely simple to use, the CR-10 PLUS allows fast colour difference measurements between a target colour and a sample in just 2 steps. On the LCD screen colour difference are shown in CIELAB ∆L*∆a*∆b* and ∆E*ab or ∆L*∆C*∆H* and ∆E*ab values. 
  •   The 8 mm measuring area (illuminated area 11 mm) and the sphere geometry (8°:di) suits almost any sample size or surface; for those applications needing a smaller spot size, the optional small spot set can decrease this measurement spot to 5 mm. 
  •   The illumination by Xenon lamp, according to CIE standard illuminant D65 and 10° observer assure repeatable and correct colour measurements. Data can be stored internally and transferred to a PC using the USB connection, or printed out using an external printer.

 Specification 

Model  Colorimeter CR-10 PLUS
Illumination / Viewing geometry  8°:di (8° illumination angle/diffuse viewing, specular component included (SCI); DIN5033 Teil7, JIS Z 8722 condition d, ISO7724/1, CIE No.15、ASTM E 1164)
Light source  Pulsed Xenon lamp
Receptors  6 silicon photocells (3 for measurement, 3 to control illumination)
Measuring/Illumination area  Ø 8 mm /11 mm (Optional Ø 5 mm /5 mm)
Display modes  Absolute Colour values (L*a*b* or L*C*h°; for targets only) Colour difference values (∆L*,∆a*,∆b*,∆C*,∆H*,∆E*ab)
Memory  1,000 (Target data and measurement data)
Measuring range  L*: 10 to 100
Illuminant/observer condition  D65 / 10°
Repeatability  Standard deviation within ∆E*ab 0.1 (Measurement conditions: average of standard white plate measurements)
Minimum interval between measurements  Approx. 3 sec
Language support  English, Japanese, Chinese
Power source  Four AA-size batteries, USB bus power or Optional AC Adapter
Battery life  Alkaline-manganese batteries: Approx.2000 measurements at 10-sec. intervals
Operating temperature/ humidity range  0 - 40°C; relative humidity 85% or less (at 35°C) with no condensation
Storage temperature/ humidity range  -20 - 55°C; relative humidity 85% or less (at 35°C) with no condensation
Dimensions (W x H x D)  66 x 158 x 85 mm
Weight  Approx. 420 g without batteries
Standard accessories  Target mask, Softcase, Protective cap, Wrist Strap, AA size batteries, USB cable
Optional accessories  Small aperture (5mm) measurement set, AC adaptor, Thermo-printer, roll paper for Thermo-printer, Dust Cover, USB-AC adaptor, Hardcase


Print】 
Pre:VM70     Next:ETB-0686
Product Catalog
Contact Us
  +86 15989496977
  +86 755 3661 8336
  +86 755 2390 6648
  sales@meterglobal.com
  ambercolorimeter
  F2, Block B, Minqing Road, Xixiang, Baoan District, Shenzhen, China.